So many mornings begin with a shower. For most of us, that’s a daily event. So, when your favorite day starts with a puddle of water on the bathroom floor, things can go wrong quickly.
Your shower might be leaking.
A shower drain without issues is an essential part of your daily routine. A pipe not being used increases your water bill and makes it harder to wash away the stress from your daily grind.
Don’t worry. We’re going to show you how to fix a leaking shower drain.
Check for Obstructions and Clogs in the Drain
The first step when fixing shower leaks is to check for obstructions and clogs in the gutter. Using a leak detection device, you can identify any areas of the drain with clogs or blockages preventing the water from flowing down the drain correctly.
You can remove debris, hair, and other objects blocking the drain. If the clog is severe, it may be necessary to use a plunger or snake to dislodge the clog from the plumbing. Additionally, use a liquid cleaner to dissolve any build-up in the drain, such as soap scum or corrosion.
Flush the system with boiling water to remove any remaining blockages and ensure proper drain functioning. After completing all these steps, the leaking shower drain should be sealed and repaired.
Purchase the Right Supplies to Address the Leak
Purchasing the right supplies to address the leak is essential when fixing leaky drains. Start by identifying the leaking area and the type of pipe it runs from. Next, check the pipe connection to ensure there are no damages on it.
When purchasing the supplies, get a suitable quality repair clamp to wrap around the leaking area and silicone caulk for persistent leaks. For a more or less permanent repair, get some plumber’s putty to seal the connection between the pipe and the drain. Finally, call extra drain stoppers to replace any worn ones.
Remove the Existing Drain Trap and Replace It
You will need essential tools such as adjustable pliers, a screwdriver, and a drain-unclogging snake. Begin by turning off the water supply and unscrewing the drain trap from below the sink. Carefully remove the entire drain trap assembly, including any old sealer or plumber’s putty.
Once the shower drain is clear, use the drain unclogging snake to help remove any dirt or debris build-up. Then, replace the drain pipe with a new one. Be sure to use a good quality sealer between the new drain pipe and the shower walls to ensure a watertight seal. Finally, replace the drain trap and secure it with screws.
Follow These Tips on How to Fix a Leaking Shower Drain
Overall, these tips will help you how to fix a leaking shower drain quickly and easily. Be sure to check the seals and ensure they are correctly fitted, guarantee the drainage area is free of debris and clean, and apply sealant gasket and compounds where needed.
Additionally, seek a professional if the issue is too big to handle alone. Tackle this pesky problem now and enjoy a safe and secure shower experience! For more articles like this, check out our other posts.
